EasyManua.ls Logo

Radio Shack PRO-70 - Troubleshooting Scanner Issues

Radio Shack PRO-70
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47
TROUBLESHOOTING
If your scanner is not working as it should, these sugges-
tions might help you eliminate the problem. If the scanner
still does not operate properly, take it to your local Ra-
dioShack store for assistance.
PROBLEM
POSSIBLE
CAUSES
REMEDIES
Scanner is
totally inop-
erative.
The batteries
are dead.
Replace the batter-
ies with fresh ones
or recharge the bat-
tery pack.
The optional
AC or DC
power adapter
is not con-
nected.
Be sure the adapter
is fully inserted into
the
PWR/DC 9V
jack.
Poor or no
reception
Improperly
connected
antenna.
Be sure the
antenna is properly
connected.
Programmed
frequencies are
the same as
birdie frequen-
cies.
Avoid program-
ming frequencies
listed under “Birdie
Frequencies” on
Page 37 or only
select them manu-
ally.
Error
appears on
the display.
Programming
error.
Reprogram the fre-
quency correctly.
Keypad
does not
work.
Keylock is
turned on.
Turn off keylock.
20-310.fm Page 47 Wednesday, August 4, 1999 10:49 AM

Related product manuals