43
2. Press
SRCH
to resume searching.
Deleting a Stored ID
1. Repeatedly press s or t to select the scan list loca-
tion (shown at the top of the display) you want to
delete.
2. Press
0
then
E
.
SCANNING THE SCAN LISTS
Press
SCAN
to begin scanning the lists you have pro-
grammed.
Note:
If you haven't programmed any IDs,
SCAN
scrolls
on the display but your scanner does not stop on an ac-
tive conversation.
To remove a scan list from active scanning, use the
number keys to enter the scan list’s number. The scan
20-520.fm Page 43 Wednesday, August 4, 1999 3:06 PM
To Next Page
Loading...
