Radio Shack PRO-94 - Turning on the Scanner and Setting the Squelch; A Look at the Display

8/17/2015 EasiertoReadPro94ScannerManual
http://marksscanners.com/94/94.shtml 6/21
NumberKeys example);selectwhichbankstoscaninscanmode;selectwhichbankstoprogramortrunkintrunkmode.
.(MON/CLR)
Putsscannerinmonitormode;storesfrequenciesintomonitormemoriesduringalimit,direct,orservicesearch;
stepsthroughthemonitorchannelsinmonitormode;entersadecimalpoint;clearstheERRORmessageand
display;storestalkgroupIDintomonitormemoryanddisplaysactivetalkgroupIDsintrunkingmode.
E(SVC)
Storesfrequenciesintochannelsinprogrammode;storesupperandlowerlimitsearchvalues;startsaservice
banksearchandselectsthenextservicebank;entersSbitstatus(onoroff);togglesbetweenIDformatswhile
trunkingEDACSsystems;unlocksalltalkgroupIDsintrunkmode;storesprogrammingfunctionsintrunkmode;
turnstheMotoroladisconnecttonedetectfunctiononoroffintrunkmode.
TurningOnTheScannerAndSettingtheSquelch

1.TurnSQUELCHfullycounterclockwise.
2.TurnVOLUME/OFFclockwiseuntilitclicksandyouhearahissingsound.
3.TurnSQUELCHclockwiseuntilthehissingstops.

Ifyouareusingthescannerforthefirsttime,straightoutofthebox,youshouldseeallzerosinthefrequencydisplay.Thescanner
willnotscanortrunkuntilyouprogramfrequenciesintothebanks.However,youcandoasearch.

Ifyouareturningtheradioonafteryouhaveprogrammedfrequenciesintoit,thescannerwillstartscanningthelastselectbanksif
youturnedtheradiooffinscanmodeor,starttrunkingthelastselectedbanksifyouturnedtheradiooffintrunkmode.
ALookattheDisplay
Contents
Thedisplayhasindicatorsthatshowthescanner'scurrentoperatingstatus.Thedisplayinformationhelpsyouunderstandhowyour
scanneroperates.
LISTappearswhentrunkscanningorprogrammingtalkgroupIDlists.
BANKAorBindicatesthebankgroupbeingused.
110(Smallnumbersatthetopofthedisplay).
 ManualMode:showswhichbankthedisplayedchannelisin.

ScanningMode:showwhichchannelstoragebanksarebeingscanned.Thebanknumberthatiscurrentlybeing
scannedwillblink.
 MonitorMode:indicatesthemonitormemorychannel(110).

SearchMode:showsthenextmonitormemorychannelreadytobeprogrammedandwillblinkuntilyoustorea
frequencyintoit.

TrunkingMode:showswhichtrunkingbankiscurrentlybeingtrunked;whenALT(DATA)ispressedwillblinkshowing
allbanksbeingtrunkedfor5seconds;blinkwhenselectingbankstotrunkorprogram.

TrunkscanningMode:showswhichtalkgroupIDlists(15)arebeingscannedinthecurrenttrunkingbank;showthe
listnumbercontainingthedisplayedIDandwillblink;showtheIDnumberbeingheldbytheholdbutton.
TRUNK

appearswhileyouaretrunking;whileyouaremonitoringtalkgroupIDs;whileprogrammingatrunkingsystem,
talkgroupIDlist,orfleetmap.
MON

appearsduringalimit,directorservicesearch;inmonitormode;afteryouhavestoredamonitorIDintoamonitor
IDmemory;whileyouaremonitoringatalkgroupID.
Channelactivitybars(20total).
Trunkingmode:Eachfrequencyyoustoreinatrunkingbankhasacorrespondingactivitybar.However,thereare