EasyManuals Logo

RadioLink RC4GS V2 User Manual

RadioLink RC4GS V2
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
RadioLink Electronic Ltd
www.radiolink.com
4
R7FG Working Mode
Working Mode
Mode 1
Mode 2
Mode 3
Mode 4
Note
Indicator Color
Green
Blue
Red&Blue
(Purple)
Red&Green
(Orange)
/
With Gyro
N
N
Y
Y
Multicolor light indicator on
means gyro function on
Channel
Corresponding signal output in different channel
/
BAT+-
Return port of model battery voltage
/
1
PWM
PWM
PWM
PWM
Rudder
2
PWM
PWM
PWM
PWM
Throttle
3
PWM
PWM
PWM
PWM
Aux
4
PWM
PWM
PWM
PWM
Aux
5
PWM
PWM
PWM
PWM
Aux
6
PWM
PWM
PWM
PWM
Aux
PPM/S.B
PPM
SBUS
SBUS
PPM
Green is PPM, Blue is
S-BUS
flight controller can be
connected under SBUS/PPM
mode and achieve different
models control incl.
Mecanum
car/Robot/Engineering
Off-road cars
Signal Switch
Short press
ID set once
to Mode 2
Short press
ID set once
to Mode 1
Short press ID
set once to
Mode 4
Short press ID
set once to
Mode 3
/
Short press
ID set 3
times
quickly to
Mode 4
Short press
ID set 3
times
quickly to
Mode 3
Short press ID
set 3 times
quickly to
Mode 2
Short press ID
set 3 times
quickly to Mode
1
/
1.2.3 Gyro Setup
A. Gyro Enabled
Factory setting is gyro function OFF by default.
Short press ID SET three times with interval less than 1 second, the RED indicator flashes three times. Red
LED on/off indicates the gyro function is on/off.
B. Gyro Phase
When the gyro forward is enabled, try to turn the model car to check if the gyro is correcting the wheels.
Normally, the wheels should turn right to correct when the car is turned left while the wheels should turn left to
correct when the car is turned right. If the gyro phase is reversed, short press the binding button (ID SET)
twice in 1 second. The Red indicator flashes twice means the gyro phase setting is complete.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the RadioLink RC4GS V2 and is the answer not in the manual?

RadioLink RC4GS V2 Specifications

General IconGeneral
Channels4
Frequency2.4GHz
Model Memory10 models
FailsafeYes
Gyro Sensitivity AdjustmentYes
Channel Bandwidth500KHz
ScreenLCD
SimulatorYes
Model TypeCar, Boat
DisplayLCD
TelemetryYes
Range400m (open area)
Battery4x AA (not included)
Spread SpectrumFHSS
Operating Voltage4.8V to 6.0V
Control Distance400m
Weight320g
ReceiverR6FG
Voltage Range4.8V to 6.0V
Compatible ReceiversR6FG, R6F
Range (open area)400m
Transmitter PowerLess than 20dBm

Related product manuals