channel key, this setting is linked to the key. When CH3 and CH4 is not assigned to the 3rd channel key, it can
be set with this screen.
You can also set the CH3, CH4, CH5 and CH6 as VR at the same time, or SW.
Channel 3 position (POSI)
SW(LOCK) or VR(RATE)
Channel 4 position (POSI)
SW(LOCK) or VR(RATE)
Channel 5 position (POSI)
SW(LOCK) or VR(RATE)
Channel 6 position (POSI)
SW(LOCK) or VR(RATE)
(1) Enter the function menu and use “Dec(-)” or “Inc(+)” button to
access AUX function.
(2) Press “Enter” button to get into CH3, CH4, CH5 or CH6 function interface.
(3) Use “Dec(-)” or “Inc(+)” button to select Channel setup item.
Use “Dec(-)” or “Inc(+)” button to select POSI, press“Enter”key and the value will blink, use “Dec(-)” or “Inc(+)”
button to select “VR” or “SW”.
Press “Enter” button, the adjusted value stops blinking, now the value has been set.
2.18 Model Name "NAME"
RC6GS V2 V2 stores model memories for ten models. Each model memory can be named separately
according to user’s requirement.
Factory default name: MODEL1
(1) Enter the function menu and use “Dec(-)” or “Inc(+)” button to
access NAME function.
(2) Press “Enter” button to get into NAME function interface, the first
character of current name will blink, and the blinking character can
be reset. The common use characters appear at the bottom of the
screen, use “Dec(-)” or “Inc(+)” button to choose the character you
desired.Press“Enter” button again, the next character of current
name will blink. Reset other characters of current name in same
manner.
(3) After accomplishment of naming, all characters of current name will stop blinking, the new name will be
stored automatically.
(4) When ending setting,return to the initial screen by pressing“Exit”button twice.(the new setting model name
will appear on the initial screen)
2.19 Low Voltage“ALARM”
Low voltage alarm of transmitter battery(TX) and model battery(EXT) is customizable, depending on what
kind of battery used.
There are four options you can choose:
Li2S-7.4V
Li3-11.1V
Ni4S-4.6V
ALARM: adjustable 4.0V to 16.0V
The car will be out of control if the battery runs
To Next Page
Loading...
Need help?
General
