RadioLink RC8X - Gyro Reverse; Gyro Sensitivity Setup

RadioLink Electronic Limited
www.radiolink.com
15
Gyro Reverse
Set the gyro forward, and turn the car right or left to see whether the gyro functions. The wheel
will turn left when the car is turned right and the wheel turns right when the car is turned left. If the
gyro acts counter, press the binding button twice, the red LED flashes twice, the gyro reverse is
corrected.
Gyro Sensitivity Setup
Gyro sensitivity is defaulted to adjust by channel eight that default
controlled by DL1/PS3 knob switch, turning the DL1/PS3 knob
switch clockwise to increase sensitivity and anti-clockwise to
reduce it. When turning the DL1/PS3 knob switch, a tooltip with
yellow background color will pop out at the top of the screen, and
the value of the channel will be changing at the same time, the
value is closer to +100, the higher sensitivity. If the value is 0, it
means the gyro function has been turned off.
You can also assign other switches to control the gyro function or adjust the sensitivity on this
page.
For more after-sales service:
Please send mail to: after_service@radiolink.com.cn
The detailed Electronic Instructions could be downloaded from RadioLink:
www.radiolink.com/rc8x_manual
Thank you again for choosing our product.