12
Turning the System All On, with No Delay
❏ I have this feature.
❏ I do not have this feature.
Use this function to turn on the entire system, both All and
Part without entry or exit delays.
This function is useful when youre staying home and you want
your system on.
1. Make sure that all points are normal. Press the 9 key
twice.
2. If all points are normal, the display shows the following for 3
seconds and the keypad beeps three times. If your system has
faulted points, you should return them to normal, or refer to
Bypassing Points.
3. After 3 seconds the system turns on. Notice that the No
Delay light is on.
4. To turn the system off, enter your personal passcode.
To Next Page
Loading...
