14
Turning the System Part On, with No Delay
❏ I have this feature.
❏ I do not have this feature.
Use this function to turn on Part of the system without entry or
exit delays.
1. Make sure that all points are normal. With your systems
display showing, press the 0 key
twice.
2. If all points are normal, the display shows the following for 3
seconds and the keypad beeps three times. If your system has
faulted points, you should return them to normal, or refer to
Bypassing Points.
3. After 3 seconds the system turns on.
4. To turn the system off, enter your personal passcode.
Turning the System On, with Points Open (Bypassing Points)
❏ I have this feature.
❏ I do not have this feature.
Use this feature to selectively exclude points you do not wish to
turn on with the rest of the system. For example, you may wish to
bypass the patio door while turning on the remainder of the
system.
To Next Page
Loading...
