17
Resetting the System
Use this feature to reset the system (including fire points) after
an alarm and to clear alarm memory. Resetting the system takes
about 20 seconds. The All, Part, and point lights go out during
reset. If points do not reset, the OK light continues to wink. Call
your alarm company for help.
1. Ensure that your system is off (On light is off).
2. Press the 3 key and enter your passcode to begin the
reset. Resetting takes approximately 20 seconds. During reset, the
display shows the following:
3. After the system is reset, the display returns to normal
operation.
To Next Page
Loading...
