20
Checking System Troubles
Your system emits a trouble tone and winks the OK light to
alert you to system trouble events. System troubles are caused by
such things as low batteries. Use this feature to learn what is
causing the trouble and what steps to take to correct it.
1. Make sure that your system is off (On light is off). If there is
a system trouble, the Trouble tone sounds and the OK light winks.
2. Press the 4 key. Lights 1 to 6 may turn on, depending on the
nature of the trouble. The following explains the meaning of the
lights:
Light What It Means
1 Fire-Point Trouble. Hold the 1 key to see which
points are in trouble.
2 Non-Fire Point Trouble. Hold the 2 key to see
which points are in trouble.
3 Power Trouble. Power to the system is off.
System is operating on battery only.
4 Communication Fail. Check the telephone line.
5 Service Required. Call your alarm company.
6 Alarm Memory. Hold the 6 key to view the
points that were in alarm.
3. Pressing the CLEAR key returns the system to the off
display.
To Next Page
Loading...
