- 17 - 
 
[time of automatic adjustment] 
P2 WORKING MODES 
[settings for the accessibility of individual modes 
while working with the balance]
 
[setting for the function weighing] 
[settings for the function counting pieces] 
[settings for the function checkweighing] 
[settings for the function dosing] 
[settings  for  the  function  deviations  %  against        
the mass of the standard] 
[settings for determining density of solids] 
[settings for determining density of liquids] 
[settings for the function animal weighing] 
[settings for the function statistics] 
[settings for the function totalising] 
[settings for the function peak hold] 
[settings for the function pipettes calibration] 
P3 COMMUNICATION 
[transmission parameters port COM 1] 
[transmission parameters port COM 2] 
[transmission parameters port WIFI] 
P4 DEVICES 
[printer connection port] 
[barcode connection port] 
[additional display port] 
P5 PRINTOUT 
[contents of the adjustment report] 
[contents of the header printout] 
[contents of the weighing result prnt.] 
[contents of the footer printout] 
[project of non-standard printout 1] 
[project of non-standard printout 2] 
[project of non-standard printout 3] 
[project of non-standard printout 4] 
P6 OTHER 
[access levels for editing menu] 
[display backlight level] 
[backlight turn-off time interval] 
[display turn-off time interval]