- 40 -
Manual tare determination
Procedure:
• While in optional mode press quick access key F, to which <ENTER TARE> option has been
assigned (setup instruction to be found further down this user manual, point <F shortcut key>).
• Wait for a respective window to open.
• Use the arrow buttons to enter the tare value and press button,
• The balance returns to the weighing mode, and the display indicates entered tare value with
minus „–" sign.
Selecting tare out of TARE DATABASE
Procedure:
• While in optional mode, press quick access key F, to which <SELECT TARE> option has been
assigned (setup instruction to be found further down this user manual, point <F shortcut key>),
or click <SELECT TARE> option available upon pressing
button.
• Wait for the first packaging weight, recorded in tare database, to be displayed.
• Use the arrow buttons to select the tare which is to be recalled and press button,
• The balance returns to the weighing mode, and the display indicates entered tare value with
a minus „–" sign.
or
• While in any working mode, press button.
• Enter b3 <TARE> option.
• Wait for the first packaging weight, recorded in tare database, to be displayed.
• Use the arrow buttons to select the tare which is to be recalled and press button.
• The balance returns to the weighing mode, and the display indicates entered tare value with
a minus „–" sign.
Deleting tare
Entered tare value can be deleted by pressing
button on the overlay or by entering tare value of
0.000g (see description above).
11.2.4. Weighing Profiles
To simplify weighing instrument operation, there are 4 profiles in the software. The profiles are
selected and saved so that the weighings for respective requirements and conditions are optimized.
Profile settings apply to settings for specific working mode and are grouped in the following
parameter: Setup/Working modes/Weighing/Readout.
For detailed description of these settings go to the next section of this user manual.
These are the following profiles:
• User – the basic profile for which filter settings are selected in a way enabling fast and precise
weighing.
• Fast – profile enabling weighing of any mass regardless of the working mode. When running
the balance for the first time, this profile is started automatically. For this profile the
parameters are selected in a way enabling obtaining the measurement result as fast as it is
possible,
• Fast dosing – the profile is dedicated for fast dosing.
• Precision – the profile is dedicated for precise dosing of any mass regardless of the working
mode. For this profile the weighing process takes the most time, but the result is the most
accurate and precise,
To Next Page
Loading...
