7. ACCURACY OF THE SCALE
− after switching the scale by pressing button ON/OFF, scale
performs auto-test, visible on the display of the instrument. While
this process, press button
− After cycle completion, scale status will look as below:
Fig 10 – choice of readability of the scale
− Press button PLUS multiple times, choose readability of the scale
− Confirm set value by pressing button TARE
− Scale will go back to weighing mode
8. BACKLIGHT
Switching on backlight :
− Press and hold button [ZERO] for 3 seconds
− Below values are accessible
o bl OFF (backlight off)
o bl ON (backlight on)
- 10 -
To Next Page
Loading...
