4. COUNTING PIECES WITH SAME UNIT MASS
4.1. Single piece mass is known
In case unit mass of the counted objects is known, counting mode can be realized in
following way:
− Place on the weighing pan a container in which the pieces will be counted, and
press button TARE
− Using numeric keyboard, please insert unit mass. Use decimal point.
− Place counted pieces on the weighing pan of the scale
− Press button
− Display described as QUANTITY will show quantity of pieces
− add following pieces, their quantity will increase automatically.
Fig 4 – counting pieces
− take the weighed elements off the pan. In order to perform
another weighing / counting, insert another unit mass
and confirm it.
− Going back to weighing mode is possible after pressing button
for CANCELING
4.2. By determination of single unit mass
If unit mass of counted objects is not known, please act as described below:
− Place a container for counting pieces on the weighing pan, and press button
TARE
− Using numeric keyboard of the indicator, insert quantity of pieces (reference
mass), which will be used to calculate single piece mass
CAUTION:
reference mass has to be natural number.
- 6 -
To Next Page
Loading...
Need help?
General
