− Place counted pieces on the weight pan of the scale
− Press button
− Display described as UNIT WEIGHT will show unit mass of a sample
− Display described as QUANTITY will show quantity of details, used for calculation
of unit mass
− Add another details, their quantity will increase automatically.
Fig. 5 – counting pieces 2
− take the weighed elements off the pan. In order to perform
another weighing / counting, insert another unit mass
and proceed as described above.
− Going back to weighing mode is possible
after pressing button for CANCELING
5. SUMMING OF WEIGHING WHILE COUNTING PIECES
While counting pieces, it is possible to use summing function. Please follow below
procedure:
1. Start counting pieces as described in points 4.1. or 4.2.
2. when scale shows quantity of pieces, press button PLUS
3. for a moment, quantity of pieces visible in display window QUANTITY with be
invisible, it is a signal that value has been accepted. At the same time, display
described as QUANTITY will show marker of summing: (M
+
)
- 7 -
To Next Page
Loading...
Need help?
General
