ISM Installation, Programming & Operation Guide
Page 11
Programming Checklist
To program your ISM sprinkler timer for the
first time, we recommend that you complete
the following steps in the order listed below.
For your convenience, a check-off box ( ❐ ) is
provided for each step.
❐ Fill out the Programming Chart .....................................page 12
❐ Set the current year/month/day/time ............................ page 15
For each program:
A B C
❐ ❐ ❐ Select pre-programmed schedules............page 18
❐ ❐ ❐ Select program (A, B or C) ........................page 19
❐ ❐ ❐ Set the watering day cycle ........................page 20
❐ ❐ ❐ Select days to water..................................page 21
❐ ❐ ❐ Set the program watering start time(s) ....... page 23
❐ ❐ ❐ Set the station duration(s)..........................page 25
❐ Set the timer to “system on”.........................................page 27
To Next Page
Loading...
