Zone Zone Description
Run Time
(Max 240 min.)
Watering Days
(circle days that apply)
* Start Time
(15 min. increments)
Cycles Per Day
(circle no. of cycles)
1 ___ Min M T W T F SA SU ODD EVEN ___:___ AM PM 1 2 3 4
2 ___ Min M T W T F SA SU ODD EVEN ___:___ AM PM 1 2 3 4
3 ___ Min M T W T F SA SU ODD EVEN ___:___ AM PM 1 2 3 4
4 ___ Min M T W T F SA SU ODD EVEN ___:___ AM PM 1 2 3 4
5 ___ Min M T W T F SA SU ODD EVEN ___:___ AM PM 1 2 3 4
6 ___ Min M T W T F SA SU ODD EVEN ___:___ AM PM 1 2 3 4
7 ___ Min M T W T F SA SU ODD EVEN ___:___ AM PM 1 2 3 4
8 ___ Min M T W T F SA SU ODD EVEN ___:___ AM PM 1 2 3 4
9 ___ Min M T W T F SA SU ODD EVEN ___:___ AM PM 1 2 3 4
Programming Chart
NOTE: A total of 4 start times can be assigned for each zone (this can be helpful for zones irrigating tight soils and slopes)
Example: If the 1st Start Time for Zone 1 is programmed for 8:00 AM and the user has selected 3X for Cycles per Day
with the +4 +8 oset, then enter +4 and +8 in the 2nd and 3rd Start Time columns. The second start time would begin at
12:00 PM and the third start time would begin at 4:00 PM.
* Start Time Schedule (multiple start times are based on user-selected watering time osets)
Cycles Per Day 1st Start Time 2nd Start Time 3rd Start Time 4th Start Time Notes
One Time (1X) ___:___ AM PM n/a n/a n/a Enter the watering time osets for
the selected Cycles per Day. (See the
Schedule Watering section, pages
6-7.)
Two Times (2X) ___:___ AM PM ___ hours n/a n/a
Three Times (3X) ___:___ AM PM ___ hours ___ hours n/a
Four Times (4X) ___:___ AM PM ___ hours ___ hours ___ hours
22
STP Plus Controller