watch the video at raindrip.com/smart
Installation & Programming
7
Items Required for Installation
• Docking Station (provided)
• #8 X 1
1
⁄4" screws (4) (provided)
• Drywall anchors (4) (provided)
• Phillips head screwdriver
• Wire strippers
• Power drill (if drywall anchors are to be used)
• 1/4" drill bit (if drywall anchors are to be used)
• Sprinkler wire (18 gage, solid copper wire recommended)
Installation Requirements
Note: If replacing an existing irrigation timer, label each of the
wires as they are removed from the old timer so they can be
placed in the same position on the RSC600i.
SmrtCntrl_InstlltnPrgrmng_Bklt 3/31/09 4:56 PM Page 7
To Next Page
Loading...
