Programming: Edit Schedule
watch the video at raindrip.com/smart
Installation & Programming
14
1. Use Programming Aid to facilitate
watering schedule programming
(pages 25 thru 30)
2. Press EDIT SCHEDULE button
3. Select ODD DATES or EVEN DATES.
4. Adjust number of watering
CYCLES, then press ENTER.
5. Repeat for all ZONES.
(continued)
Option 2: WATER ON ODD OR EVEN DATES OF MONTH
SmrtCntrl_InstlltnPrgrmng_Bklt 3/31/09 4:57 PM Page 14
To Next Page
Loading...