RainPoint TTV102B - Install Water Timer

5. INSTALL THE BLUETOOTH WATER TIMER
1) Turn o the garden faucet.
2) Wrap Teon Tape around the faucet threads.
3) Screw the timer to the garden faucet and make the display is as veical
as possible to the ground to prevent rainwater from accumulating and
leaking into the interior.
4) Wrap Teon Tape around the threads of the timer outlets.
5) Screw the garden hoses to the timer outlets.
6) Turn on the faucet after programming the timer.
Tips: If the connection between the timer and the faucet or hose is not
tight or leaking, wrap more Teon Tape(thread seal tape) to make them tight.
Outlet
Inlet
Less than 160 feets
(No bushes, walls blocking)
Please install the lter properly and keep it clean as follows.
Warning
* Please make sure the sma phone is near the Bluetooth water timer
when connecting orsetting the watering plan. The best range for
connection and operation is within 60 meters in the open area. If there
are walls iron gates or bushes blocking, please shoen the distance
betweenthem to better receive the signal.
Please install the lter correctly to achieve better ltering eect.
- 09 -