RainPoint TTV102B - Resetting the Device; Reset Irrigation Gateway; Reset Bluetooth Timer

Home Management
1. Tap Me at the bottom of the APP home screen.
2. Select Home Management.
3. Set your home name, room management and home location.
RESET THE DEVICE
How to reset the Irrigation Gateway ?
Step 1. Power OFF or Remove the Bluetooth Hub from the power source.
Step 2. After 10 seconds, power on or plug the Bluetooth hub to the
power source.
Step 3. Press and hold the middle button on the Bluetooth hub without
releasing the button until the indicator light quickly ashed
(2 times per second), then the Bluetooth hub is restored to pair
mode.
How to reset the Bluetooth Irrigation Timer ?
Step 1. Remove all batteries from the batte compament.
Step 2. After 10 seconds,inse 3 fresh AAA(1.5V）alkaline batteries into
the batte compament of the timer.
Step 3. Press and hold the button on the timer without releasing the
button until the blue LED indicator quickly ashed
(2 times per second), then the Bluetooth timer is restored to pair
mode.
- 21 -