RainPoint TTV203WRF - Step 5: Test Before Use

- 13 -
STEP 5. TEST BEFORE USE
Congratulations, you have completed the connection and installation of the 2 zone WiFi water timer. Please test
whether the internal valve of your water timer is normal before using it.
1. Keep the faucet turned o.
2. Press the left/right zone button of the timer, with a "click" sound, the left/right valve inside the timer opens for
manual watering. After a few seconds, press the left/right zone button again, the "click" will sound again, and the
left/right zone valve will close.
3. Turn on the faucet a little bit, press the left/right zone button of the timer to check if the water ow out or
shut o as expected. If yes, the valve is normall, please use it with condence! If not, please repeat the above steps
several times.
The test is over, evething is normal, please keep the faucet fully turned on!
Note:
When testing, please keep away from the timer outlet to avoid being splashed and wet.
EN
EN