RAM DBS II
Refrigeration Solid State Starter
Handling and Storage
Handling
• Strap or brace the DBS controller prior to moving it.
• Do not top-stack DBS controllers.
• Do not remove DBS controller from skid or unpack it until final installation, if possible.
• Packaged DBS controllers should be moved with a forklift and tethered with safety straps.
• Top-lifting should be done only with suitable lifting eyes attached to mounting brackets when provided.
Storage
If the DBS controller will be stored for an extended period before installation:
• Inspect for possible damage incurred in transit.
• Re-package after inspection.
• Store in clean, dry environment with a uniform temperature to prevent condensation inside the controller.
• Cover the controller to protect from dust, moisture, and falling objects.
C
Handling and Storage
To Next Page
Loading...
Need help?
General