R
amsond
Instruction Manual for CT 416 and 518 D & DX Series
© Copyright RAMSOND Corporation 2007 – All rights protected. Unauthorized reproduction, in part or whole prohibited.
®
FRONT PANEL DIAGRAM
DIAGRAM #4
NOTES ON DX SERIES
DX Series – Equipped with Digital Amperage Display
1. The digital display panel may remain lit for a period of up to 1 minute after turning off the unit. This
is normal.
2. The digital display of Amperage may display a value that exceeds or fall short of the
maximum/minimum performance parameters of the unit. This is normal within a 5-10% range.
3. The digital display of Amperage may fluctuate during operation. This is normal.
4. The AMP level on the digital display may not correspond with the printed AMP level on the panel.
This is normal. In case of discrepancy, rely on the digital display.
5. Fluctuations of digital display during operation are considered normal.
Page 8
To Next Page
Loading...
