R
amsond
Instruction Manual for CT 416 and 518 D & DX Series
© Copyright RAMSOND Corporation 2007 – All rights protected. Unauthorized reproduction, in part or whole prohibited.
®
MMA ARC (STICK WELD) FUNCTION OPERATION
1. Ensure proper connection before you begin. See Diagram 2.
2. Turn on the power Switch.
3. Move the toggle switch of the function selector to the MMA position.
4. Set a desired welding current according to the thickness of the work piece, the
rod, and the technical requirements.
5. Begin to weld
Page 11
To Next Page
Loading...