EasyManua.ls Logo

Ranco EcoCool E72R - 9 Responsibility and Residual Risks; 10 Disclaimer

Default Icon
32 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
9 RESPONSIBILITY AND RESIDUAL RISKS
Ranco
®
and its affiliated companies (collectively “Ranco”) shall not be liable for damages caused by or attributed to the user including, but not limited to
the following:
Unauthorized installation and/or use that does not comply with the safety standards specified in applicable regulations and/or in this document.
Use on equipment that does not guarantee adequate protection against electric shocks, water or dust when assembled.
Use on equipment that allows dangerous parts to be accessed without the use of tools.
Installation and/or use on equipment that is not compliant with the current standards and regulations in force.
10 DISCLAIMER
Ranco shall not be liable for damages originating from the installation and/or use of the software that does not comply with the instructions of this manual.
While reasonable efforts have been made in the preparation of this document to ensure its accuracy, Ranco assumes no liability resulting from the
information contained herein.
To the maximum extent permitted by law, Ranco assumes no liability for special, accidental, direct, indirect, consequential, exemplary or punitive damages
(including, without any limitation whatsoever, the loss of in income or profits, interruption of work, loss of data or goodwill) originating from the use or failure
of the software or equipment or from the supply or failure to supply technical support, even when informed of the likeliness of said damages.
To the maximum extent permitted by law, in no event shall the liability of Ranco exceed the amount paid to Ranco for the quantities of its products giving
rise to the liability.
Type E7 EcoCool™ Electronic Temperature and Defrost Controllers
©2008 Invensys Controls All rights reserved.
DRAFT VERSION
North America
191 E. North Avenue
Carol Stream,Illinois 60188 USA
Customer Service Telephone 1.800.304.6563
Customer Service Facsimile 1.800.426.0804
HVACCustomerService@invensyscontrols.com
www.invensyscontrols.com
Canada
3505 Laird Road Unit #14
Mississauga,Ontario L5L 5Y7 Canada
Customer Service Telephone 1.800.387.7978
Customer Service Facsimile 1.905.828.1265
CanadianCustomerService@invensyscontrols.com
www.invensyscontrols.com
Invensys
®
, Ranco
®
and EcoCool™are trademarks of Invensys plc., its subsidiaries and/or affiliated companies.
All other brands mentioned may be the trademarks of their respective owners. 10/08 – 354-00027-001 Rev. E
South America – Brazil
Av. Dr. Cardoso de Melo 1750
CEP - 04548-005 Vila Olimpia - São Paulo - Brazil
Customer Service Telephone +55 11 2109-0800
Customer Service Facsimile +55 11 3621-9138
vendas_iac_sp@invensys.com.br
www.invensysappliance.com.br
www.invensysappliance.com.br
South America – Other than Brazil
Rua Tronca, 1370
CEP 95010-100 – Caxias do Sul – RS – Brazil
Customer Service Telephone +55 54 3218-1400
Customer Service Facsimile +55 54 3228-1634
vendas_iac_sp@invensys.com.br
www.invensysappliance.com.br
For Technical Service:
Telephone +1 800 445 8299
Facsimile +1 630 260 7243
technicalservice@invensys.com

Table of Contents

Related product manuals