GUI reference
R&S
®
ZNA
786User Manual 1178.6462.02 ─ 20
●
"Service Function...": Service Function dialog
Language
Selects the language of the graphical user interface. A message box indicates that the
vector network analyzer application needs to be restarted to activate a different lan-
guage.
English is the preinstalled language. A setup file for additional languages ("Vector Net-
work Analyzer Translation Setup") is available for download from the Rohde & Schwarz
Internet site.
Remote command:
n/a
Remote Encoding
Selects the character encoding used at the remote interface. The selected encoding
applies to directory and file names, calibration kit names, calibration unit characteriza-
tions and display titles.
Currently the following encodings are supported: ANSI (default), UTF-8, Shift JIS.
Remote command:
SYSTem:COMMunicate:CODec
5.19.1.2 System Config dialog
The "System Config" dialog allows you to define global settings that are not affected by
an instrument reset. See Chapter 4.1.1, "Global (persistent) settings", on page 84.
Access: System – [Setup] > "Setup" > "System Config..."
Setup softtool
To Next Page
Loading...
