R&S ZNA50 - Page 796

GUI reference
R&S
®
ZNA
796User Manual 1178.6462.02 ─ 20
Geometric Calculation of Bandfilter Center
Defines how bandfilter searches calculate the center frequency of the passband or
stopband (see "Bandfilter search" on page 106).
If "Geometric Calculation of Bandfilter Center" is checked, the geometric mean of the
lower band edge and upper band edge frequencies is used, otherwise their arithmetic
mean.
Remote command:
CALCulate:MARKer:FUNCtion:BWIDth:GMCenter
Error Dump Type
Determines the level of detail ("Minimal", "Normal", "Large", "Full") and hence the size
of the dump files that are created if a firmware exception occurs. "None" disables dump
file creation.
The latest 5 exception dumps can be retrieved using the "Save Report" function of the
"Info" dialog (see "Create R&S Support Information" on page 805).
For further information, see Chapter 9, "Error messages and troubleshooting",
on page 1632.
Remote command:
DIAGnostic:DUMP:SIZE
Touchstone Export Options
Configures whitespace insertion during legacy Version 1.1 (ZNx) Touchstone file
export.
The default export format is explained in Chapter 4.4.2.1, "Touchstone files",
on page 150:
●
logical columns are vertically aligned using spaces
Setup softtool