VNA GUI reference
R&S
®
ZNL/ZNLE
376User Manual 1178.5966.02 ─ 20
For an explanation of the possible filters, see "Contents" on page 375).
Tracking Enabled
If checked (default), the "Fault Table" on page 375 is cleared at every sweep start and
populated in real time. Uncheck "Tracking Enabled" to freeze the table contents.
10.6.8 Trace Statistics tab
Evaluates statistical and phase information of the entire trace or of a specific evalua-
tion range.
10.6.8.1 Controls on the Trace Statistics tab
Figure 10-6: Trace Statistics tab: R&S
ZNL (left) vs. R&S
ZNLE (right)
The "Evaluation Range..." button opens the "Evaluation Range" dialog (see Chap-
ter 10.6.8.2, "Evaluation Range dialog", on page 381).
Min/Max/Peak-Peak, Mean/Std Dev/RMS
The upper two softkeys in the "Trace Statistics" tab display or hide groups of statistical
results. The values are based on all response values of the trace in the selected evalu-
ation range ("Evaluation Range...").
Trace softtool
To Next Page
Loading...
