R&S ZNL4 - Hcopy:device:color

Command reference
R&S
®
ZNL/ZNLE
592User Manual 1178.5966.02 ─ 20
'MMEM'
Activates "Print to file". Thus, if the destination of the print func-
tion is set to "printer" (see HCOP:DEST1 'SYSTem:COMMuni
cate:PRINter' or HCOP:DEV:LANG GDI), the output is redir-
ected to a .PRN file using the selected printer driver.
Select the file name with MMEMory:NAME.
Note: To save a screenshot to a file, see HCOPy:DEVice:
LANGuage on page 593.
'SYSTem:COMMunicate:PRINter'
Sends the hardcopy to a printer and deactivates "print to file".
Select the printer with SYSTem:COMMunicate:PRINter:
SELect<di> .
'SYSTem:COMMunicate:CLIPboard'
Sends the hardcopy to the clipboard.
*RST:
'SYST:COMM:CLIP'
Example: To print on a printer:
//Destination: printer, deactivate "print to file"
HCOP:DEST1 'SYSTem:COMMunicate:PRINter'
//Define the printer name
SYST:COMM:PRIN:SEL 'myFavoritePrinter'
//Print
HCOP:IMM
Example: To print to a *PRN file:
//Destination: printer
HCOP:DEV:LANG GDI
//Define the printer name
SYST:COMM:PRIN:SEL 'myFavoritePrinter'
//Redirect the printer output to a file
HCOP:DEST1 'MMEM'
//Define file name
MMEM:NAME 'C:\R_S\instr\user\MeasurementTestReport.png'
//Print
HCOP:IMM
Manual operation: See "Destination: Clipboard" on page 112
HCOPy:DEVice:COLor <State>
This command turns color printing on and off.
Parameters:
<State> ON | OFF | 0 | 1
ON | 1
Color printing
OFF | 0
Black and white printing
*RST: 1
Common instrument commands