R&S ZNL4 - Checking the System Configuration

Command reference
R&S
®
ZNL/ZNLE
617User Manual 1178.5966.02 ─ 20
• <version>
• <LXIClass>
• <ComputerName>
• <MACAddress>
• <IPAddress>
• <AutoMDIX>
SYSTem:LXI:LANReset
This command resets the LAN configuration, as well as the "LXI" password and instru-
ment description.
Manual operation:
See " LXI Reset" on page 161
SYSTem:LXI:MDEScription <Description>
This command defines the "LXI" instrument description.
Parameters:
<Description> String containing the instrument description.
SYSTem:LXI:PASSword <Password>
This command defines the "LXI" password.
Parameters:
<Password> String containing the password.
Return values:
<Password>
Manual operation: See "LAN Password" on page 161
SYSTem:REVision:FACTory
Resets the response to the REV? query to the factory default value.
Usage:
Event
11.3.4.6 Checking the system configuration
The following commands are required to check the system configuration on the
R&S ZNL/ZNLE.
Useful commands for obtaining system information described elsewhere:
●
DIAGnostic:SERVice:SINFo? on page 622
Common instrument commands