R&S ZNL4 - Marker Search Softtool; Peak Tab

VNA GUI reference
R&S
®
ZNL/ZNLE
458User Manual 1178.5966.02 ─ 20
10.11 Marker Search softtool
The "Marker Search" softtool provides functions for searching and tracking special
points on traces.
Access: [Mkr->] hardkey
Background information
See Chapter 9.2.1, "Display elements of a VNA diagram", on page 194.
● Peak tab................................................................................................................458
● Multiple Peak tab...................................................................................................464
● Target Search tab..................................................................................................466
● Bandfilter tab.........................................................................................................468
10.11.1 Peak tab
Provides "Marker Search" functions that move the active marker to a (local) maximum
or minimum of the active trace.
The search operation can be restricted to a configurable range of stimulus values
("Search Range..."). By default, the search range is equal to the entire sweep range.
If necessary, the active marker is enabled to indicate the search result.
Background information
Refer to "Basic marker search functions" on page 202.
Marker Search softtool