Getting Started
R&S
®
ZNL/ZNLE
60User Manual 1178.5966.02 ─ 20
3. In the "Save" dialog box, tap the "File name" field and enter MyMultiViewSetup
using the keyboard.
Keep the default "File Type" setting "Instrument with all Channel Setups" to store
the configuration of all channel setups.
Figure 4-7: Saving the instrument settings to a file
4. Tap the "Save" button.
The file MyMultiViewSetup.dfl is stored in the default directory
C:\Users\Public\Documents\Rohde-Schwarz\ZNL\Save.
To load stored instrument settings
You can restore the settings to the instrument at any time using the settings file.
1. Press the [Preset] button to restore the default instrument settings so you can
check that the stored user settings are actually restored afterwards.
2. Tap the "Load" icon in the toolbar.
3. In the "Load" dialog box, select the MyMultiViewSetup.dfl file in the default
directory C:\Users\Public\Documents\Rohde-Schwarz\ZNL\Save.
Trying out the instrument
To Next Page
Loading...
