17
Problem Possible Cause Solution
Burner is not igniting or only partially
lighting.
• Burner parts may not be clean or
dry.
• Ensure that parts of the appliance
are dry and clean.
Burner sounds noisy. • - • This is normal. The noise may
reduce as they heat up.
Noise • It is normal for some metal parts
on the cooker to produce noise
when in use.
Oven light (if available) does not
operate.
• Lamp has failed.
• Electrical supply is disconnected
or switched off.
• Replace lamp according to the
instructions.
• Make sure the electrical supply
is switched on at the wall socket
outlet.
The timer buttons cannot be pressed
properly.
• There is foreign matter caught
between the timer buttons.
• Touch model: there is moisture on
the control panel.
• The key lock function is set.
• Remove the foreign matter and try
again.
• Remove the moisture and try
again.
• Check whether the key lock
function is set.
Cooling fan (if available) isn’t working • Electrical supply is disconnected
or switched off.
• Make sure the electrical supply
is switched on at the wall socket
outlet.
Transport
If you need to transport the product, use the original product
packaging and carry it using its original case. Follow the
transport signs on the packaging. Tape all independent parts
to the product to prevent damaging the product during
transport.
If you do not have the original packaging, prepare a carriage
box so that the appliance, especially the external surfaces of
the product, is protected against external threats.
To Next Page
Loading...
