NOTICE
Oven stand mounting kit is not included in
delivery and must be ordered separately.
> Insert the oven stand into the foot locks and
set the stand up horizontally in the installation
location.
Securing a gas appliance:
Installing onto an original oven stand, a work
table or onto the kitchen floor (e.g., Combi-Duo):
> Connect unit feet with foot locks
Article number: 12.00.519 (1x)
Article number: 60.70.463 (set of 4)
1 Unscrew the lower part of the feet
2 Push the retaining plates into the bases and
secure using the nuts provided
3 Screw the bases back in with the retaining
plates in place
4 Adjust all four feet to same length.
To Next Page
Loading...
