11
3 Installation instructions
3 Installation instructions
Standards > Local and country-specic standards and reg-
ulations regarding the installation and opera-
tion of commercial cooking appliances must
be observed at all times.
> In all other countries, the corresponding
country-specic standards and regulations
are to be observed.
Liability / Warranty > Damage occurring as a result of non-compli-
ance with installation instructions is excluded
from the warranty.
> Installations and repairs not carried out by
authorized professionals or not using original
spare parts, and technical modications to
the unit which are not approved by the man-
ufacturer in writing, void the manufacturer’s
warranty and product liability.
Conformity > Unit conformity is in reference to the overall
unit at the time of delivery. The operator is
responsible for ensuring extended conformi-
ty following any expansions/connection of
additional functions.
Connection work > The necessary connections (water, electricity,
drain and gas) must only be set up by trained
professionals in accordance with local regula-
tions.
Prior to installation > Check the unit for transport damage.
If you suspect the unit has been damaged in
transit, contact your dealer/freight forwarder
immediately! Ensure to note damage at time
of delivery on bill of lading with the driver.
Disposing of old appliances > When the unit reaches the end of its service
life, it must not be taken to a municipal col-
lection point for trash or used electrical appli-
ances. Please conntact your service provider
for disposal.
To Next Page
Loading...
Need help?
General
