53
9 Exhaust gas connection
9 Exhaust gas connection
DANGER
Asphyxiation hazard!
Combustion products (CO and CO
2
)
Prevent unacceptable concentrations of harm-
ful combustion products within the installation
room.
Set up the unit under conditions of adequate
ventilation.
Observe instructions given in the currently valid
versions of all local standards during installation.
For gas exhaust on unit, it must be placed under
an exhaust hood externally vented (observe your
local regulations). Clearance above flue pipes
shall be 16” (400 mm).
Room ventilation The rooms in which these appliances are installed
must be well ventilated, in order to prevent an
unacceptable build-up of harmful combustion
products.
To Next Page
Loading...
