Rational CombiMaster Plus User Manual

Program mode
54 / 107
- If the display flashes, it means the program slot is vacant.
- The remaining cooking time is shown during operation in the “cooking time/core temperature”
display. If the program includes a step with core temperature, the remaining time is only shown
when this step has been finished.
- It is not possible to change between core temperature and cooking time or vice versa.
- Stop the program by opening the cooking cabinet door. Cancel the program by choosing a
different cooking mode or switching the appliance off.
- To change the settings later, turn the selection button to the zero setting first (at the top) and
then adjust the required time or temperature.
If you press the button during current operating you will change the cooking
time of the current step. The new value is not saved.
If you press the button during current operating you will change the core
temperature of the current step. The new value is not saved.

Rational CombiMaster Plus Specifications

General

Model	CombiMaster Plus
Manufacturer	Rational
Category	Oven
Cooking modes	Steam, Convection, Combination
Temperature range	30°C to 300°C
Cleaning system	Manual cleaning
Power Consumption	Varies by model
Steam Generator Output	Varies by model
Weight	Varies by model
Dimensions	Varies by model
Control type	Manual
Capacity	10-20 levels (depending on model)