rav G3.150 - Page 17

INSTRUCTION, USE AND
MAINTENANCE MANUAL
EN
Page 17 of 91
3. Tighten tyre inner rod (Fig._7 ref. 1) with flange
inner rod (Fig._7 ref. 2) by using the wrench pro-
vided (Fig._7 ref. 3) and a 12 mm wrench (Fig._7
ref. 4). Use also a torque spanner (Fig._7 ref. 5)
(not supplied) on one of the 2 holes on the provided
spanner (Fig._7 ref. 3).
Fig. 7
4. Lock the chuck by pressing the brake and turn the
pneumatic shaft screw (Fig._8 ref. 1) onto the flange
(Fig._8 ref. 2) until it stops.
Fig. 8
5. Tighten with the wrench provided (Fig._8 ref. 3).
REMOVAL
1. Open the pneumatic chuck by means of the pedal
provided and make sure the outer ball (Fig._9 ref.
1) is in the position indicated in Fig._9.
Fig. 9
2. Lock the chuck by pressing the brake and unlock the
pneumatic shaft (Fig._10 ref. 1) using the wrench
provided (Fig._10 ref. 2).
Fig. 10
1297-M058-00
G3.150 - GP3.150 - G3.150S - GP3.150S - G3.150WS - GP3.150WS - G3.150WSPLUS - GP3.150WSPLUS - G3.150SA - G3.150WSA
RAVAGLIOLI S.p.A.