EN
Page 66 of 91
INSTRUCTION, USE AND
MAINTENANCE MANUAL
Perform another test spin.
The “weights hidden behind spokes” procedure is
completed.
Complete the operation by adding an additional weight
inside the rim as required by the selected mode (ALU-
S).
14.8.4 Matching mode
The Matching procedure offsets strong unbalance,
reducing the weight quantity to be fitted on the wheel
to achieve balancing. This procedure permits reducing
unbalance as much as possible by offsetting the tyre
unbalance with that of the rim in any used program.
Proceed to unbalance measurement displaying by
performing a standard wheel spin.
THE MATCHING PROCEDURE CAN
BE CARRIED OUT ONLY IF THE
STATIC UNBALANCE IS > 30 G.
Once detected the unbalance values, verify that the
machine displays the ability to use the “matching” op-
tions (Fig. 56 ref. 4a).
Press button to shift to the next screen page.
Press button to enter the relevant function.
G3.150 - GP3.150 - G3.150S - GP3.150S - G3.150WS - GP3.150WS - G3.150WSPLUS - GP3.150WSPLUS - G3.150SA - G3.150WSA
RAVAGLIOLI S.p.A.
1297-M058-00
To Next Page
Loading...