rav G3.150 - Information Plate Location Drawing

92 pages

Save Page as PDF

To Next Page

To Previous Page

Page 8 of 91

INSTRUCTION, USE AND

MAINTENANCE MANUAL

INFORMATION PLATE LOCATION DRAWING

G3.150 - GP3.150 - G3.150S - GP3.150S - G3.150WS - GP3.150WS - G3.150WSPLUS - GP3.150WSPLUS - G3.150SA - G3.150WSA

RAVAGLIOLI S.p.A.

1297-M058-00

Main Page

Table of Contents2
General Description5
Symbols Used in the Manual7
Information Plate Location Drawing8
General Introduction10
Introduction10
Intended Use10
Training of Personnel10
Safety Devices11
Residual Risks11
General Safety Rules12
Packing and Mobilization for Transport13
Unpacking13
Mobilization14
Working Environment Conditions14
Working Area14
Lighting15
Machine Assembly15
Anchoring System15
Assembly Procedures16
Fitting the Chuck on the Flange16
Fitting and Removal of the Pneumatic Chuck on the Flange16
Monitor Fitting18
Fitting of External Data Gauge (Standard on some Models)19
Fitting the Protection Guard20
Protection Guard Assembly with Automatic Width Measuring De- Vice (Standard on some Models)21
Laser Device "12 O'clock" (Optional)22
Protection Guard Assembly with Automatic Width Measuring Device and Laser Device "12 O'clock" (Optional)22
Check Correct Operation of Laser Device "12 O'clock" (Optional)22
Tional)23
Fitting of Ultrasound Run-Out with Support (Optional)24
Installation of Printer Kit25
(Optional)25
Electrical Connections38
Electrical Checks38
Air Connection39
Fitting the Wheel on the Chuck39
Wheel Assembly39
Wheel Assembly41
Adjustment of Ultrasound Sensor Support (Standard on some Models)42
Correct Positioning of Ultrasound Run-Out Detection Device (Optional)43
Display with Keyboard44
Wheel Balancing44
Switching the Machine on and off44
Balancing Programs Setting45
Programs Rapid Setting and46
Distance-Diameter Caliper Arm46
Programs Setting through49
Screen Page49
Indicative Display of Points Where to Detect Measures/To Fit Weight50
Weights Positioning51
Displaying the Active/Modifiable Field51
Wheel Balancing Screen Page Description52
Balancing Mode54
Use of Machines with Disabled Automatic Data Gauge57
Manual Setting of Wheel Dimensions57
Standard Balancing Programs58
Static58
Static-158
Static-258
Dynamic58
Alu-S59
Alu-S159
Alu-S259
Alu-159
Alu-260
Alu-360
Alu-460
Optional Balancing Programs61
ECO-WEIGHT Mode (Standard on some Models)61
SPLIT Mode63
Weights Hidden Behind Spokes65
Mode65
Matching Mode66
Special Balancing Programs69
Pax69
Recalculation Function69
Wheel Balancing in Motorcycle Mode (with Distance Caliper Extension Kit)70
User Menu (Options and Calibration)70
Options Menu71
Lower Weight Limit73
Setting Adhesive Weight Dimensions and Static Threshold Percentage73
User Management74
Enabling of Electronic Run-Out Measuring Device (Optional)75
Machine Calibrations76
Chuck "0" (Zero) Calibration76
Weight Measurement Sensors Calibration77
Gauges Calibration78
Error Signals83
Error Signals of Printer Kit (Optional)83
Routine Maintenance84
Technical Data85
Technical Electrical Data85
Technical Mechanical Data85
Dimensions86
Storing87
Scrapping87
Registration Plate Data87
Functional Diagrams87
Drawing C - Electronic Board Disposition91

rav G3.150 - Information Plate Location Drawing

Table of Contents

Related product manuals