To Next PageTo Next PageWhat should I do if the mandrel does not reach the maximum rotation speed on my Ravaglioli Tyre Changer?
If the mandrel does not reach the maximum rotation speed, turn the mandrel without wheel for a few minutes so that the system heats, thus reducing frictions. If in the end the mandrel does not accelerate again, call for assistance.
What to do if the bead-breaker hydraulic pump jams on Ravaglioli Tyre Changers?
If the bead-breaker hydraulic pump jams, the bead-breaker lubricator might be empty. Top up the reservoir with suitable oil after disconnecting the mains supply, then call for technical assistance.
What to do if the nozzle doesn’t supply air when the inflation pedal is pressed on Ravaglioli Tyre Changer?
If the nozzle doesn’t supply air when the inflation pedal is pressed, call for technical assistance, the inflation pedal may be badly adjusted.
General| Category | Tyre Changers |
|---|---|
| Manufacturer | Ravaglioli |
| Model | G8945D.26 |
| Rim Diameter Range | 10" - 26" |
| Tyre Width Range | 3" - 15" |
| Air Pressure | 8 - 10 bar |
Machine operation by trained, authorized personnel only. Training ensures safe and efficient use.
Analysis of residual risks per EN ISO 12100, noted via pictograms and warnings.
General safety rules: no tampering, use original parts, maintain clean area, proper earthing.
Instructions for securing the machine to the ground using anchor blocks and screws.
Safety rules for tyre fitting: use clean rims/tyres, lubricate, check tyre size, avoid air/water jets.
Procedure for breaking tyre beads using the side vane tool, including lubrication and tool positioning.
Instructions on how to lock rims onto the rubber plate using the central hole and locking device.
Detailed steps for breaking tyre beads using the vertical roll, including tool positioning and lever operation.
Procedure for demounting the tyre after beads are broken, involving tool positioning and mandrel rotation.
Steps for mounting the tyre, including lubrication, tool positioning, and rotating the wheel for assembly.
