START FIELD AND JOB | CR7 | QUICKSTART STEERING MANUAL
PAGE 14/34 | User manual | 016-8000-017EN | Rev. B
3 START FIELD AND JOB
QUICK START NEW FIELD AND NEW JOB
Press the green checkmark.
Press the blue arrow on the bottom of the
screen.
Select the Grower and Farm as created in the
GFF settings (step 26) and enter a Field
Name.
Job Name is standard the date and time of
creation. Change this if needed.
Press next step.
The name of the mounted implement is
shown.
In case this is not correct, go back to step
#19.
In case this is correct, press next step.
The Job will open. Proceed to step #35.
To Next Page
Loading...
