Raven MPV-7100 - Cutting Deck Features; Blade Engage Switch; Deck Lift Lever

Gasket Callout-Carburetor
Instructions
Tools:
• none
Parts:
• gaskets - 5
Gasket Callout
IMPORTANT: Turn off power & remove key.
1.
Identify the gasket used between the engine block and
the manifold spacer (see Figure A). The gasket must
be in the same position as Figure A before attaching.
Identify the gasket used between the manifold
spacer
and the carburetor (see Figure B). This gasket can
be
two different colors - gray or green. The gasket must
be in the same position as Figure B before attaching.
Identify the gasket used between the carburetor
and
the choke assembly (see Figure C). The gasket must
be in the same position as Figure C before attaching.
Identify the gasket used for the choke assembly
(see
Figure D). The gasket must be in the same position
as
Figure D before attaching.
2.
3.
4.
Denver Global Products 1000 East Powell Dr. | Lincolnton, NC 28092 U.S.A
© 2013 Denver Global Products | RATO All rights reserved.
Choke Assembly Gasket
D
Carburetor and Choke
Assembly Gasket
C
Manifold Spacer
and Carburetor Gasket
B
Engine Block and
Manifold Spacer Gasket
A