Raven MPV-7100 - Instruction Text; Installation Instructions

12 Volt Relay Remove/Replace
Installation Instructions
Tools:
• 8 mm Driver
• 10 mm Driver
Instruction Text
1. To remove the relays from frame use the Driver
to remove the hotplate post (fig.A)
2. Use the 8 mm drive to remove the 8mm screw.
(fig B)
3. Simply unplug the relay from the wiring
harness. (Fig D) And remove the 8mm Screw.
4. The Relays are called out
C8- AVR Relay
C9- Back Fire Relay
C10- Back Fire Relay
C11- Blade (PTO) Relay
C11
C10
C9
C8
Denver Global Products 1000 East Powell Dr. | Lincolnton, NC 28092 U.S.A
© 2014 Denver Global Products | RATO All rights reserved.