STANDARD TORQUE VALUES
Item Specifications
Torque valve
Foot Pounds Kg·m
Standard
torque
5mm bolt, nut 4 0.55
6mm bolt, nut 7.5 1.0
8mm bolt, nut 15.5 2.4
10mm bolt, nut 28 3.75
12mm bolt, nut 40.5 5.5
Other Important System Torques:
Transaxle Plug torque- 55 ft. Ibs
Pillow block steering- 15 ft. Ibs
A-Arm Bolts- 35 ft. Ibs
Transaxle Hi/Lo lever – 40 ft. Ibs
Tie Rob castle Nuts- 19 ft. Ibs
Steering shaft Bolt- 20 ft. Ibs
Upper shock mount- 40 ft. Ibs
Rear lug nuts- 40 ft. Ibs
Contactor post- 5 ft. Ibs
U Bolts- 35 ft. Ibs
Parking brake pawl- 30 in pounds
Power Terminals- 5 ft. Ibs
• Loctite 425
Blade Stud Nut (Blade Fastener) -40 ft. Ibs
• Loctite 263 1 full ampule per stud/motor shaft. - 24 hour cure.@72’F
Blade Motors- 20 ft. Ibs
• Loctite 242
Blade Motor Controller Screws
• Loctite 290
Gauges- Hot Glue
• 3M 3779TC Scotch weld hot melt adhesive
To Next Page
Loading...