APPENDIX F
104 RCM - Sprayer and Hawkeye® 2 Calibration and Operation Manual
5. Next, enable Bluetooth communication with the RCM - Sprayer ECU. To enable Bluetooth via the UT:
a. Open the UT Menu and select the RCM - Sprayer Menu button.
b. Select the Tools Menu softkey along the right side of the display.
c. Select the System Settings tab along the top of the display.
d. Use the Wireless Control Mode drop-down and select the Section option.
FIGURE 2. Enable Wireless
6. Take note of the Wireless ID and passcode on the prompt displayed on the UT. This information will be
necessary to connect to the RCM - Sprayer ECU.
FIGURE 3. Wireless Connection Confirmation
IMPORTANT: Do not attempt to connect the Raven Diagnostics app and RCM - Sprayer devices yet.
RCM - Sprayer Menu Tools Menu System
Settings
UT Menu
User Settings
To Next Page
Loading...