CHAPTER
1
Manual No. 016-0159-925 Rev. F 1
C hapter 1
Important Safety
Information
Safety Information
Read this manual and the operation and safety instructions included with the implement and/or controller
carefully before installing the SCS 4000/5000 Series console.
• Follow all safety information presented within this manual.
• If you require assistance with any portion of the installation or service of Raven equipment, contact a local
Raven dealer for support.
• Follow all safety labels affixed to the system components. Be sure to keep safety labels in good condition
and replace any missing or damaged labels. To obtain replacements for missing or damaged safety labels,
contact a local Raven dealer.
When operating the machine after installing the SCS 4000/5000 Series console, observe the following safety
measures:
• Be alert and aware of surroundings.
• Do not operate the console while under the influence of alcohol or an illegal substance.
• Remain in the operator’s position in the machine at all times when the console is engaged in product control
or feature operation. The machine operator is responsible for disabling or turning off automatic control
features before leaving the operator’s position.
• Determine and remain a safe working distance from other individuals. The operator is responsible for
disabling or turning off automatic control features when the safe working distance has been diminished.
• Ensure the console is disabled prior to starting any maintenance work on the machine or parts of the
application system.
• Follow all label instructions for proper chemical mixing, handling and container disposal methods.
Thoroughly bleed the nurse tank hose and all other system lines prior to disassembling the flow meter, fittings
and hoses, especially in the case of anhydrous ammonia.
NOTICE
DANGER
To Next Page
Loading...
Need help?
General
