27
FILE 1 GPS FILE REFERENCE
Used only with Raven Grid Application System. See Grid Application System
manual for more details.
GPS InAC GPS OPTIONS
Used only with Raven Grid Application System. See Grid Application System
manual for more details.
FrEF 0 FIELD REFERENCE
Allows user to enter up to a four-digit number to represent a field. Field
reference is included in field begin and field end pages and the data logger
time/date string.
bAUd 1200 BAUD RATE
Used in GPS mode and data logging mode. Selectable between 1200
or 9600 baud (Serial interface console only).
DISPLAY
RATE DATA FEATURE and DESCRIPTION
TriG 0 DATA LOGGER TRIGGER VALUE
Used in data logging mode. The trigger determines how often actual rate data
string (See Appendix 8 for data communication string formats) is sent to the
serial port. The trigger may be either feet [meters] or seconds.
UniT FT DATA LOGGER TRIGGER UNITS
Used in data logging mode. The trigger unit is selectable between feet
[meters] or seconds.
dLoG oFF DATA LOGGER ON/OFF
Turns data logger ON or OFF.
oFHi 253 PWM VALVE HIGH OFFSET
Used to keep the high end of the valve in the active area.
oFLo 1 PWM VALVE LOW OFFSET
Used to keep the low end of the valve in the active area.
FrEq 122 PWM VALVE OPERATING FREQUENCY
The operating frequency of the valve as recommended by the manufacturer.
dSA 50 DUAL SENSOR ALARM
Used in Gr3 mode. Alarm will sound and Flo will flash in RATE when left and
right side flow rates are farther apart from each other than the percent set in
dSA.
To Next Page
Loading...
