26
10) GPS SYSTEM OPTIONS
a) GPS is inactive when the PROD 1 display shows "GPS", the PROD 2 display shows "SYSt",
and the DATA display shows "InAC". The GPS features are explained further in the GRID
APPLICATION SYSTEM MANUAL.
b) Momentarily depress
to advance to GPS FILE REFERENCE.
c) Momentarily depress
to advance to the DATE category.
DATE SCREENS
11) TIME
a) PROD 1 display will show "dAtE". PROD 2 display will show "tiME". The DATA display will
show "0:00".
b) Enter the current time of day.
c) Momentarily depress
to advance to MONTH.
NOTE: This is a 24 hour clock. Therefore, all time after 12:59 p.m., add 12 hours. Thus, 8:30
a.m. is entered as 8:30, but 1:30 p.m. is entered as 13:30 in the keyboard.
12) MONTH
a) PROD 1 display will show "dAtE". PROD 2 display will show "onth". The DATA display will
show "0".
b) Enter the current month by number (i.e. 1 = January, 2 = February, etc.).
c) Momentarily depress
to advance to DAY.
13) DAY
a) PROD 1 display will show "dAtE". PROD 2 display will show "daY". The DATA display will
show "0".
b) Enter the current day of the month.
c) Momentarily depress
to advance to YEAR.
14) YEAR
a) PROD 1 display will show "dAtE". PROD 2 display will show "YEAr". The DATA display will
show "00".
b) Enter the current year.
c) Momentarily depress
to advance to POWER DOWN.
15) POWER DOWN
a) If the Console is not used for 10 days, it will go into a power down (low power) mode of
operation. In this mode, all data is retained, but the time
To Next Page
Loading...
Need help?
General
